Rocket Controller Driver for FreeBSD Copyright (C) 2015 HighPoint Technologies, Inc. All rights reserved. ############################################################################# Revision History: v1.1.4 2015-06-09 * Fix a bug that FailLED was not initialized properly. v1.1.3 2015-05-19 * Support Report Luns command. v1.1.2 2015-05-05 * Fix a bug that report wrong physical sector size for 512e HDD. v1.1.1 2015-03-26 * Support 4Kn drive. * Change the SCSI target ID of the disk to be the index of physical connetion to the HBA. * Support staggered drive spin up. * Fix a bug that command would be timeout because of improper interrupt service routine. * Error handling to avoid scsi command lost which caused system hang up. * Fix a bug that fail to get the devcie's serial number via FreeNAS WebGUI. v1.0.1 2014-8-19 * Do not retry the command and reset the disk when failed to enable or disable spin up feature. * Fix up a bug that disk failed to probe if driver failed to access the 10th LBA. * Fix a bug that request timeout but it has been completed in certain cases. * Support smartmontool for R750. v1.0 2013-7-3 First source code release ############################################################################# 1. Overview --------------------- This package contains FreeBSD driver source code for HighPoint Rocket controller, include: SATA Controller: R750, DC7280. NO WARRANTY THE DRIVER SOURCE CODE HIGHPOINT PROVIDED IS FREE OF CHARGE, AND THERE IS NO WARRANTY FOR THE PROGRAM. THERE ARE NO RESTRICTIONS ON THE USE OF THIS FREE SOURCE CODE. HIGHPOINT DOES NOT PROVIDE ANY TECHNICAL SUPPORT IF THE CODE HAS BEEN CHANGED FROM ORIGINAL SOURCE CODE. LIMITATION OF LIABILITY IN NO EVENT WILL HIGHPOINT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, HIGHPOINT SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR RECOVERING SUCH HARDWARE, OR DATA. 2. Rebuild the kernel with HighPoint Rocket support ----------------------------------------------- 1) Install kernel source package and building tools. 2) Extract the driver files under the kernel source tree: # cd /usr/src/sys/ # tar xvzf /your/path/to/HPTNR_FreeBSD_Src_1.x.x_xx_xx_xx.tgz 3) Update the kernel configuration file to include the HighPoint source. Assume the configure file is GENERIC, and new kernel configure file is MYKERNEL: # cd i386/conf (or amd64/conf for AMD64) # cp GENERIC MYKERNEL 4) Edit MYKERNEL, and add the following line under "RAID controllers interfaced to the SCSI subsystem": device "hptnr" #HighPoint Rocket 5) For i386 system, edit /usr/src/sys/conf/files.i386 and append the lines shown below: hptnr_lib.o optional hptnr \ dependency "$S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \ compile-with "uudecode < $S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \ no-implicit-rule dev/hptnr/hptnr_os_bsd.c optional hptnr dev/hptnr/hptnr_osm_bsd.c optional hptnr dev/hptnr/hptnr_config.c optional hptnr For amd64 system, edit /usr/src/sys/conf/files.amd64 and append the lines shown below: hptnr_lib.o optional hptnr \ dependency "$S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \ compile-with "uudecode < $S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \ no-implicit-rule dev/hptnr/hptnr_os_bsd.c optional hptnr dev/hptnr/hptnr_osm_bsd.c optional hptnr dev/hptnr/hptnr_config.c optional hptnr 6) Rebuild and install the kernel: a) for FreeBSD 5.x-i386/6.x-i386/7.x-i386/8.x-i386/9.x-i386/10.x-i386: # cd /usr/src/sys/i386/conf/ # /usr/sbin/config MYKERNEL # cd ../compile/MYKERNEL/ # make depend # make # make install b) for FreeBSD 5.x-amd64/6.x-amd64/7.x-amd64/8.x-amd64/9.x-amd64/10.x-amd64: # cd /usr/src/sys/amd64/conf/ # /usr/sbin/config MYKERNEL # cd ../compile/MYKERNEL/ # make depend # make # make install c) for FreeBSD 4.x: # cd /usr/src/sys/i386/conf/ # /usr/sbin/config MYKERNEL # cd ../../compile/MYKERNEL/ # make depend # make # make install If the driver was previously configured as an auto-loaded module by /boot/defaults/loader.conf, please remove the entry hptnr_load="YES" from loader.conf to prevent the driver from being loaded twice. 7) Reboot from the new kernel. 3. Build/Load the driver as a kernel module ------------------------------------------------ 1) Install kernel source package and building tools. 2) Extract the driver files under the kernel source tree: # cd /usr/src/sys/ # tar xvzf /your/path/to/HPTNR_FreeBSD_Src_1.x.x_xx_xx_xx.tgz 4) Build the driver module: # cd modules/hptnr # make 5) Copy the driver module to the kernel module directory For FreeBSD 4.x: # cp hptnr.ko /modules/ For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x: # cp hptnr.ko /boot/kernel/ 6) Reboot and load the driver under loader prompt. e.g: BTX loader 1.00 BTX version is 1.01 Console: internal video/keyboard BIOS driver A: is disk0 BIOS driver C: is disk2 BIOS 636kB/74512kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (mailto:jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT 2001) Loading /boot/defaults/loader.conf /kernel text=0x24f1db data=0x3007ec+0x2062c - Hit [Enter] to boot immediagely, or any other key for command prompt. Booting [kernel] in 9 seconds <-- press SPACE key here Type '?' for a list of commands, 'help' for more detailed help. ok load hptnr /modules/hptnr.ko text=0xf571 data=0x2c8+0x254 ok boot For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x, you can select 6 on the boot menu to get a loader prompt. 7) You can add a below line into /boot/defaults/loader.conf to load the driver automatically: hptnr_load="YES" Please refer to the installation guide in HighPoint FreeBSD driver release package for more information. ############################################################################# Technical support and service If you have questions about installing or using your HighPoint product, check the user's guide or readme file first, and you will find answers to most of your questions here. If you need further assistance, please contact us. We offer the following support and information services: 1) The HighPoint Web Site provides information on software upgrades, answers to common questions, and other topics. The Web Site is available from Internet 24 hours a day, 7 days a week, at http://www.highpoint-tech.com. 2) For technical support, send e-mail to support@highpoint-tech.com NOTE: Before you send an e-mail, please visit our Web Site (http://www.highpoint-tech.com) to check if there is a new or updated device driver for your system. $FreeBSD: head/sys/dev/hptnr/README 284792 2015-06-25 06:15:08Z delphij $