/*- * Copyright (c) 2005 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: head/sys/compat/ndis/winx32_wrap.S 187948 2009-01-31 11:37:21Z obrien $ */ /* The 'ret' macro doesn't work in this file if GPROF is enabled. */ #ifdef GPROF #undef GPROF #endif #include /* * This file contains assembly language wrappers for the different * calling conventions supported by Windows on the i386 architecture. * In FreeBSD, the whole OS typically use same C calling convention * everywhere, namely _cdecl. Windows, on the other hand, uses several * different C calling conventions depending on the circumstances: * * _stdcall: Used for most ordinary Windows APIs. With _stdcall, * arguments are passed on the stack, and the callee unwinds the stack * before returning control to the caller. Not suitable for variadic * functions. * * _fastcall: Used for some APIs that may be invoked frequently and * where speed is a critical factor (e.g. KeAcquireSpinLock() and * KeReleaseSpinLock()) Similar to _stdcall, except the first 2 32-bit * or smaller arguments are passed in the %ecx and %edx registers * instead of on the stack. Not suitable for variadic functions. * * _cdecl: Used for standard C library routines and for variadic * functions. * * _regparm(3): Used for certain assembly routines. All arguments * passed in %eax, %ecx and %edx. * * Furthermore, there is an additional wrinkle that's not obvious * with all code: Microsoft supports the use of exceptions in C * (__try/__except) both in user _and_ kernel mode. Sadly, Windows * structured exception handling uses machine-specific features * that conflict rather badly with FreeBSD. (See utility routines * at the end of this module for more details.) * * We want to support these calling conventions in as portable a manner * as possible. The trick is doing it not only with different versions * of GNU C, but with compilers other than GNU C (e.g. the Solaris * SunOne C compiler). The only sure fire method is with assembly * language trampoline code which both fixes up the argument passing, * stack unwinding and exception/thread context all at once. * * You'll notice that we call the thunk/unthunk routines in the * *_wrap() functions in an awkward way. Rather than branching * directly to the address, we load the address into a register * first as a literal value, then we branch to it. This is done * to insure that the assembler doesn't translate the branch into * a relative branch. We use the *_wrap() routines here as templates * and create the actual trampolines at run time, at which point * we only know the absolute addresses of the thunk and unthunk * routines. So we need to make sure the templates have enough * room in them for the full address. * * Also note that when we call the a thunk/unthunk routine after * invoking a wrapped function, we have to make sure to preserve * the value returned from that function. Most functions return * a 32-bit value in %eax, however some routines return 64-bit * values, which span both %eax and %edx. Consequently, we have * to preserve both registers. */ /* * Handle _stdcall going from Windows to UNIX. * This is frustrating, because to do it right you have to * know how many arguments the called function takes, and there's * no way to figure this out on the fly: you just have to be told * ahead of time. We assume there will be 16 arguments. I don't * think there are any Windows APIs that require this many. */ .globl x86_stdcall_wrap_call .globl x86_stdcall_wrap_arg .globl x86_stdcall_wrap_end ENTRY(x86_stdcall_wrap) push %esi push %edi sub $64,%esp mov %esp,%esi add $64+8+4,%esi mov %esp,%edi mov $16,%ecx # handle up to 16 args rep movsl movl $ctxsw_wtou, %eax call *%eax # unthunk x86_stdcall_wrap_call: movl $0,%eax call *%eax # jump to routine push %eax # preserve return val push %edx movl $ctxsw_utow, %eax call *%eax # thunk pop %edx pop %eax # restore return val add $64,%esp # clean the stack pop %edi pop %esi x86_stdcall_wrap_arg: ret $0xFF x86_stdcall_wrap_end: /* * Handle _stdcall going from UNIX to Windows. This routine * expects to be passed the function to be called, number of * args and the arguments for the Windows function on the stack. */ ENTRY(x86_stdcall_call) push %esi # must preserve %esi push %edi # and %edi mov 16(%esp),%eax # get arg cnt mov %eax,%ecx # save as copy count mov %esp,%esi # Set source address register to point to add $20,%esi # first agument to be forwarded. shl $2,%eax # turn arg cnt into offset sub %eax,%esp # shift stack to new location mov %esp,%edi # store dest copy addr rep # do the copy movsl call ctxsw_utow # thunk call *12(%edi) # branch to stdcall routine push %eax # preserve return val push %edx call ctxsw_wtou # unthunk pop %edx pop %eax # restore return val mov %edi,%esp # restore stack pop %edi # restore %edi pop %esi # and %esi ret /* * Fastcall support. Similar to _stdcall, except the first * two arguments are passed in %ecx and %edx. It happens we * only support a small number of _fastcall APIs, none of them * take more than three arguments. So to keep the code size * and complexity down, we only handle 3 arguments here. */ /* Call _fastcall function going from Windows to UNIX. */ .globl x86_fastcall_wrap_call .globl x86_fastcall_wrap_arg .globl x86_fastcall_wrap_end ENTRY(x86_fastcall_wrap) mov 4(%esp),%eax push %eax push %edx push %ecx movl $ctxsw_wtou, %eax call *%eax # unthunk x86_fastcall_wrap_call: mov $0,%eax call *%eax # branch to fastcall routine push %eax # preserve return val push %edx movl $ctxsw_utow, %eax call *%eax # thunk pop %edx pop %eax # restore return val add $12,%esp # clean the stack x86_fastcall_wrap_arg: ret $0xFF x86_fastcall_wrap_end: /* * Call _fastcall function going from UNIX to Windows. * This routine isn't normally used since NDIS miniport drivers * only have _stdcall entry points, but it's provided anyway * to round out the API, and for testing purposes. */ ENTRY(x86_fastcall_call) mov 4(%esp),%eax push 16(%esp) call ctxsw_utow # thunk mov 12(%esp),%ecx mov 16(%esp),%edx call *8(%esp) # branch to fastcall routine push %eax # preserve return val push %edx call ctxsw_wtou # unthunk pop %edx pop %eax # restore return val add $4,%esp # clean the stack ret /* * Call regparm(3) function going from Windows to UNIX. Arguments * are passed in %eax, %edx and %ecx. Note that while additional * arguments are passed on the stack, we never bother when them, * since the only regparm(3) routines we need to wrap never take * more than 3 arguments. */ .globl x86_regparm_wrap_call .globl x86_regparm_wrap_end ENTRY(x86_regparm_wrap) push %ecx push %edx push %eax movl $ctxsw_wtou, %eax call *%eax # unthunk x86_regparm_wrap_call: movl $0,%eax call *%eax # jump to routine push %eax # preserve return val push %edx # preserve return val movl $ctxsw_utow, %eax call *%eax # thunk pop %edx # restore return val pop %eax # restore return val add $12,%esp # restore stack ret x86_regparm_wrap_end: /* * Call regparm(3) function going from UNIX to Windows. * This routine isn't normally used since NDIS miniport drivers * only have _stdcall entry points, but it's provided anyway * to round out the API, and for testing purposes. */ ENTRY(x86_regparm_call) call ctxsw_utow # thunk mov 8(%esp),%eax mov 12(%esp),%edx mov 16(%esp),%ecx call *4(%esp) # branch to fastcall routine push %eax # preserve return val push %edx # preserve return val call ctxsw_wtou # unthunk pop %edx # restore return val pop %eax # restore return val ret /* * Ugly hack alert: * * On Win32/i386, using __try/__except results in code that tries to * manipulate what's supposed to be the Windows Threada Environment * Block (TEB), which one accesses via the %fs register. In particular, * %fs:0 (the first DWORD in the TEB) points to the exception * registration list. Unfortunately, FreeBSD uses %fs for the * per-cpu data structure (pcpu), and we can't allow Windows code * to muck with that. I don't even know what Solaris uses %fs for * (or if it even uses it at all). * * Even worse, in 32-bit protected mode, %fs is a selector that * refers to an entry in either the GDT or the LDT. Ideally, we would * like to be able to temporarily point it at another descriptor * while Windows code executes, but to do that we need a separate * descriptor entry of our own to play with. * * Therefore, we go to some trouble to learn the existing layout of * the GDT and update it to include an extra entry that we can use. * We need the following utility routines to help us do that. On * FreeBSD, index #7 in the GDT happens to be unused, so we turn * this into our own data segment descriptor. It would be better * if we could use a private LDT entry, but there's no easy way to * do that in SMP mode because of the way FreeBSD handles user LDTs. * * Once we have a custom descriptor, we have to thunk/unthunk whenever * we cross between FreeBSD code and Windows code. The thunking is * based on the premise that when executing instructions in the * Windows binary itself, we won't go to sleep. This is because in * order to yield the CPU, the code has to call back out to a FreeBSD * routine first, and when that happens we can unthunk in order to * restore FreeBSD context. What we're desperately trying to avoid is * being involuntarily pre-empted with the %fs register still pointing * to our fake TIB: if FreeBSD code runs with %fs pointing at our * Windows TIB instead of pcpu, we'll panic the kernel. Fortunately, * the only way involuntary preemption can occur is if an interrupt * fires, and the trap handler saves/restores %fs for us. * * The thunking routines themselves, ctxsw_utow() (Context SWitch UNIX * to Windows) and ctxsw_wtou() (Context SWitch Windows to UNIX), are * external to this module. This is done simply because it's easier * to manipulate data structures in C rather than assembly. */ ENTRY(x86_getldt) movl 4(%esp),%eax sgdtl (%eax) movl 8(%esp),%eax sldt (%eax) xor %eax,%eax ret ENTRY(x86_setldt) movl 4(%esp),%eax lgdt (%eax) jmp 1f nop 1: movl 8(%esp),%eax lldt %ax xor %eax,%eax ret ENTRY(x86_getfs) mov %fs,%ax ret ENTRY(x86_setfs) mov 4(%esp),%fs ret ENTRY(x86_gettid) mov %fs:12,%eax ret ENTRY(x86_critical_enter) cli ret ENTRY(x86_critical_exit) sti ret