.\" $FreeBSD: head/share/man/man4/aibs.4 267938 2014-06-26 21:46:14Z bapt $ .\" $NetBSD: aibs.4,v 1.2 2010/02/09 05:37:25 cnst Exp $ .\" $OpenBSD: aibs.4,v 1.4 2009/07/30 06:30:45 jmc Exp $ .\" .\" Copyright (c) 2009/2010 Constantine A. Murenin .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd April 4, 2010 .Dt AIBS 4 .Os .Sh NAME .Nm aibs .Nd "ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor" .Sh SYNOPSIS To compile this driver into the kernel, place the following line in your kernel configuration file: .Bd -ragged -offset indent .Cd "device aibs" .Ed .Pp Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : .Bd -literal -offset indent aibs_load="YES" .Ed .Sh DESCRIPTION The .Nm driver provides support for the voltage, temperature and fan sensors available through the .Tn ATK0110 .Tn ASOC .Tn ACPI device on .Tn ASUSTeK motherboards. The number of sensors of each type, as well as the description of each sensor, varies according to the motherboard. .Pp The driver supports an arbitrary set of sensors, provides descriptions regarding what each sensor is used for, and reports the current values as well as the supposed range specifications of each sensor's input as defined by the motherboard manufacturer through .Tn ACPI . .Pp The range specifications are as follows: .Bl -bullet .It Voltage sensors have a lower and an upper range specification. .It Temperature sensors have two upper specifications. .It Fan sensors may either have only the lower specification, or, depending on the .Tn DSDT , one lower and one upper specification. .El .Pp Sensor readings and the range specifications are made available through the .Xr sysctl 3 interface, and can be monitored with .Xr sysctl 8 . For example, on an ASUS V3-P5G965 barebone: .Bd -literal -offset indent > sysctl dev.aibs.0.{volt,temp,fan} dev.aibs.0.volt.0: 1192 850 1600 dev.aibs.0.volt.1: 3312 2970 3630 dev.aibs.0.volt.2: 5017 4500 5500 dev.aibs.0.volt.3: 12302 10200 13800 dev.aibs.0.temp.0: 28.0C 80.0C 95.0C dev.aibs.0.temp.1: 55.0C 60.0C 95.0C dev.aibs.0.fan.0: 878 600 7200 dev.aibs.0.fan.1: 0 700 7200 .Pp > sysctl -d dev.aibs.0.{volt,temp,fan} dev.aibs.0.volt: dev.aibs.0.volt.0: Vcore Voltage dev.aibs.0.volt.1: +3.3 Voltage dev.aibs.0.volt.2: +5 Voltage dev.aibs.0.volt.3: +12 Voltage dev.aibs.0.temp: dev.aibs.0.temp.0: CPU Temperature dev.aibs.0.temp.1: MB Temperature dev.aibs.0.fan: dev.aibs.0.fan.0: CPU FAN Speed dev.aibs.0.fan.1: CHASSIS FAN Speed .Ed .Pp Generally, sensors provided by the .Nm driver may also be supported by certain other drivers or utilities that access the .Tn ISA / .Tn LPC or .Tn I2C / .Tn SMBus devices directly. The precise collection of .Nm sensors is comprised of the sensors specifically utilised in the motherboard design, which may be supported through a combination of one or more physical hardware monitoring chips. .Pp The .Nm driver, however, provides the following advantages when compared to the native hardware monitoring drivers or other utilities: .Bl -bullet .It Sensor values from .Nm are expected to be more reliable. For example, voltage sensors in many hardware monitoring chips can only sense voltage from 0 to 2 or 4 volts, and the excessive voltage is removed by the resistors, which may vary with the motherboard and with the voltage that is being sensed. In .Nm , the required resistor factors are provided by the motherboard manufacturer through .Tn ACPI ; in the native drivers, the resistor factors are encoded into the driver based on the chip manufacturer's recommendations. In essence, sensor values from .Nm are very likely to be identical to the readings from the Hardware Monitor screen in the BIOS. .It Sensor descriptions from .Nm are more likely to match the markings on the motherboard. .It Sensor range specifications are supported by .Nm . The range specification is reported for each individual sensor as suggested by the motherboard manufacturer. For example, the threshold for the CPU temperature sensor is likely to be significantly higher than that for the chassis temperature sensor. .It Support for newer chips in .Nm . Newer chips may miss a native driver, but should be supported through .Nm regardless. .El .Sh SEE ALSO .Xr sysctl 3 , .Xr acpi 4 , .Xr sysctl 8 .Sh HISTORY The .Nm driver first appeared in .Ox 4.7 , .Dx 2.5 , .Nx 6.0 and .Fx 9.0 . .Pp An earlier version of the driver, .Nm acpi_aiboost , first appeared in .Fx 7.0 and .Nx 5.0 . .Sh AUTHORS .An -nosplit The .Nm driver was written for .Ox , .Dx , .Nx and .Fx by .An Constantine A. Murenin Aq Mt cnst@FreeBSD.org , Raouf Boutaba Research Group, David R. Cheriton School of Computer Science, University of Waterloo. .Pp An earlier version of the driver, named .Nm acpi_aiboost , was written for .Fx by .An Takanori Watanabe .